A vast selection of grit dental burs exist, all to lend a hand to the dentist for any given procedure. Whether it requires eliminating dental decay, prepping fillings, or simply smoothing tooth surfaces – the right bur will get the job done. Sizes, shapes, and different grits come in abundance to meet whatever needs arise in the dental office.
A range of materials, such as steel, carbide, and diamond are used to create grit burs. Steel burs, which are typically employed in dental care centers, are the most typical and economical. Costlier carbide burs are tougher and able to handle more challenging substances. The toughest and most expensive burs are those crafted from diamond, able to tackle even the most complex materials.
When performing a dental procedure, the bur you need depends on the task – if you’re eliminating rot from a tooth, try a bur with a higher level of grit and if you’re preparing for a filling, choose one that is finer.
From large to small, the selection of grit burs makes it easy to choose one best suited for a given task. If a dental decay needs attention, then larger bur is necessary; conversely, if a dental filling is being placed, a smaller bur should be employed.
Upon picking up a grit bur to begin work, consider the following tips in order to get the most bang for you buck:
Begin at a gradual rate, raising the speed incrementally as required.
When using the bur, remember to apply a gentle touch. Keep the pressure to a minimum. Doing so will help achieve the desired results and it is also important to be careful and precise in your movements.
To prevent any harm from coming to the tooth, the bur must be constantly circulated.
Keep your instruments placid and fresh by giving them a light spritz with water now and then.
Post-usage, make sure to clean the bur with sterilizing techniques.
For any visit to the dentist, the use of a grit bur is an absolute must. But picking the right one is no easy task; luckily, following these guidelines guarantees you’ll find the correct bur for the job at hand, preventing potential harm to the tooth in the process.
Post time: 2023-06-27